Home Office - 8121 W. Harrison, Tolleson, AZ 85353 Phone (800) 347- 8274
(623) 907- 4034 Fax (623) 907-4100
home
specs
about us
contact us
24 mil reinforced polypropylene spec sheet
FABRIC SPECIFICATIONS
CONSTRUCTION
Reinforcing polyester scrim between polypropylene barrier layers
COLOR
Black
WEIGHT
16 oz/yd2 (542 g/m2) +/- 5 %
THICKNESS
Nominal 24 mils -0.024” ( 0.61 mm)
Coating Thickness: 4.0 mil average each side
PERFORMANCE
GRAB TENSILE
Warp 274 lb 1218 N
Weft 230 lb 1026 N
ASTM D751/NSF
TONGUE TEAR
Warp 73 lb 324 N
Weft 48 lb 213 N
ASTM D2261
TONGUE TEAR-LARGE SCALE
Warp 141 lb 628 N
Weft 168 lb 746 N
ASTM D5884
TRAPEZOIDAL TEAR
Warp 138 lb 613 N
Weft 75 lb 333 N
ASTM D4533
MULLEN BURST
338 psi 2332 kPa
ASTM D3786
HYDROSTATIC RESISTANCE
328 psi 2265 kPa
ASTM D751
PUNCTURE RESISTANCE
89 lb 395 N
ASTM D4833
CARBON BLACK CONTENT
4.57 %
ASTM D4218
VOLATILE LOSS
0.23 %
ASTM D1203
DIMENSIONAL STABILITY
Warp -0.33 %
Weft 0.03 %
ASTM D1204
LOW TEMPERATURE FLEX
Warp Pass @ -40°
Weft Pass @ -40°
ASTM D2136
ACCELERATED UV WEATHERING
> 80 % strength after 2000 hrs
ASTM G53
1 Q.U.V. [A-340 Lamps]: 8 hrs UV @ 60o C; 4 hrs condensation @ 50o C
These values are typical data and are not intended as limiting specifications.
